case spreader

[naughtyboy]

had a mate bring some cases over from some pre-war farm equipment hes restoring.
needed a speader to get internals out.

made one up using pce of 1" rd stck drilled and tapped m10, then made jacking bolt out of some 7/16 hex bar with one end threaded m10 and other end to 8mm.
then made 3 spacers to fit on 8mm end ranging from 1/2" - 1-1/2" long.

[kbalch]

Thanks naughtyboy! I've added your Case Spreader to our Machining category, as well as to your builder page: naughtyboy's Homemade Tools. Your receipt:

Case Spreader by naughtyboy

tags: case spreader