Quote Originally Posted by Tuomas View Post
Because there was empty space on this side of the table.
I made a simple clamp rack to get that space to use.

Diy 20 ton hydraulic bench top press-img_20210531_211644_588.jpg
Congratulations, Tuomas. How do we equip with these in every corner and free space?

Not having many 'F' clamps, it's worth 'C' clamps that'll run one handed. Once developed, a little wrist action, all it takes.
But they have to be within reach!

ACME threaded advance quickest, but don't grow on trees. So, hand wire-brush screws once in awhile and lube with silicone spray.