Homemade Rr-track anvil

[Tuomas]

Material is 45cm long piece of 54kg/m rr-track.

[mklotz]

Gorgeous work, Tuomas. The finish is fine enough to use the anvil for making jewelry; no marks left in the gold by the anvil. You're a real artist with that grinder too.

[Tuomas]

Gorgeous work, Tuomas. The finish is fine enough to use the anvil for making jewelry; no marks left in the gold by the anvil. You're a real artist with that grinder too.

Thank you very much.

Nice that you have same toughts. I like that anvil in this size, needs to have a smooth surface, then it doesn't leave " stamps " to the workpiece.

[superhl]

Pure talent!

[animal12]

What kind of cut off wheels did you use ?
thanks
animal

[Tuomas]

What kind of cut off wheels did you use ?
thanks
animal

It was mentioned in first pinned comment.

Tools and abrasives used:

Metabo WE 2200-230 230mm angle grinder with 2mm thick 3M cubitron 2 cut off wheels. For making the cuts. Making all cuts took about 3 wheels.

Metabo WEV 11-125 Quick 125mm 1100W angle grinder with 3M cubitron fibre disc. For rough shaping and smoothening. Used two 36grit wheels.

METABO W 750-125 125mm 750W angle grinder with 3M Roloc pad.
Used: 60,80 and 120 grit Roloc cubitron papers. Two pcs each.
Brown, red and blue 3M Scotch brite finishing pads. One pcs each.

Anvil was made during two days.

[animal12]

Thank you . I need to get some of those
animal

[DIYer]

Thanks Tuomas! We've added your Anvil to our Anvils category,
as well as to your builder page: Tuomas's Homemade Tools. Your receipt:

Anvil by Tuomas

tags: anvil

[rossbotics]

Beautiful work Tuomas
beautiful finish

Doug

[Tuomas]

Beautiful work Tuomas
beautiful finish

Doug

Thank you very much Doug.