This is how I turned a very cheap palm router into a pretty useful toolpost grinder for my lathe.
I was surprised at just how good the results were from grinding with this tool.
If you do make one please make a safety guard.
Cheers
https://youtu.be/emebs0ItMgc
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Cazual Haze! We've added your Tool Post Grinder to our Grinding category,
as well as to your builder page: Cazual Haze's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-tool-post-grinder-42"> <img src="/uploads/258967/homemade-tool-post-grinder-42.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-tool-post-grinder-42">Tool Post Grinder</a> <span> by <a href="https://www.homemadetools.net/builder/Cazual+Haze">Cazual Haze</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/grinder'>grinder</a>, <a href='https://www.homemadetools.net/tag/tool-post'>tool post</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Nicely made attachment
When cyl grinding you need to rotate the work in the opposite direction to the wheel, this stops the loose grit and debris (and there always is some) from being crushed back into the work. You will get a better finish that way. I dont grind in the lathe but instead I use a CBN tipped tool which will cut 65 Rockwell hardened tool steel for better than ground finish.
Attachment 45298 Attachment 45299
Rule #1 for Poor Welders. If nobody can see the poor welds, you're not as poor as you think you are. ;) I'm a poor welder, too, but my welds are usually quite strong. Which would leave much room for grinding! :)Quote:
Originally Posted by Cazual Haze
Bill
Congratulations Cazual Haze - your Tool Post Grinder is the Homemade Tool of the Week!
This is a very well thought-out build (part one is here), and it was built using some older homemade tools, including a tailstock die holder and a diamond wheel dresser.
Some more good builds from this week:
Acid Vat by Frank S
Keyway Cutter Attachment by LMMasterMariner
Track Guide Plates by thehomeengineer
Cylinder Square by PaulsGarageProjects
Drilling and Countersinking Bit by mr_modify1
Micrometer Cheek Pieces by Occasional machinist
Explosives Cargo Box by Frank S
Marking Gauge by Make Things
Carbide Insert Holder by Improvised DIY
Work Table Brake by Frank S
Cargo Box Mount by Frank S
Mini Hand Grinder by My MiniCrafts
Cazual Haze - we've added your tool entry to our All Homemade Tool of the Week winners post. And, you'll now notice the wrench-on-pedestal award in the awards showcase in your postbit, visible beneath your username:
https://www.homemadetools.net/forum/...OfTheWeek4.pnghttps://www.homemadetools.net/forum/...eWeekIcon4.png
And, you'll be receiving a $100 online gift card, in your choice of Amazon (US-only), PayPal, or bitcoin. Please PM me your current email address and award choice and I'll get it sent over right away.
Nice work! :thumbsup:
Wow thank you stunned people think the grinder is a worthy contender.
casual.haze@gmail.com
Thanks nice idea my lathe would struggle to get that sort of finish I just dont think its rigid enough.
PayPal transfer or Amazon.com gift card?Quote:
Originally Posted by Cazual Haze
