LinkBack URL
About LinkBacksHi. My homemade and very simple machine for precise sharpening drills. The engine of an old washing machine 180W 1350 rpm, everything else is trimming tubes and angles.
Hi. My homemade and very simple machine for precise sharpening drills. The engine of an old washing machine 180W 1350 rpm, everything else is trimming tubes and angles.
blkadder (Jul 4, 2016), Paul Jones (Jul 1, 2016), rossbotics (Jul 3, 2016)
In the photo you can see the quality sharpening. During drilling from both sides cut chips evenly.
rossbotics (Jul 3, 2016)
What a good job you made of this. It's grate, well done.
David
Vyacheslav.Nevolya (Jul 6, 2016)
At the end of the video shows the process of sharpening drill.
Also, I do a drawing device if required.
lazarus (Jul 7, 2016), Paul Jones (Jul 7, 2016), Yaculls (Jul 6, 2016)
Hi Vyachestav, like the video. If you have a drawing it would be much appreciated. Thanks again David
Sorry for the bad quality, drawing in an image editor.
Thanks for the image, it's good of you to share and it's a grate help. Once again it's a good job.
Many thanks, David
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks