Machinist Vise and Milling/Drilling Vise Stops

[jjr2001]

I made the one for the Wilton drill press vise a while back. The vise was modified with a much larger guide block to reduce lift.
The stop I made for that one worked fine on that vise but was too large for my 3" machinist vise that I use on the mill.
It worked but was a bit large for small parts.

I made a new one that just fits the machinist vise but is kinda small for the Wilton. That is ok.
We now have a set of two. The one for the machinist vise using a drill blank extension to allow
milling of small parts while being able to move the cutter almost to the top surface of the vise
and stay out of the cutters reach.

Cheers, JR