LinkBack URL
About LinkBacks
 by AB-SHOP - https://www.youtube.com/watch?v=560dCElLpQU
Good morning everyone,
I immediately realized, when my milling machine arrived, that tightening the ER32 chuck practically requires 3 hands, which nobody has!
Because the cutter does not always have a unified diameter and you have to hold it in the collet while closing the nut, or you need more than one chuck with the cutter mounted ready.
At this point I tried, with the space "Pin It")
Good morning everyone,
I immediately realized, when my milling machine arrived, that tightening the ER32 chuck practically requires 3 hands, which nobody has!
Because the cutter does not always have a unified diameter and you have to hold it in the collet while closing the nut, or you need more than one chuck with the cutter mounted ready.
At this point I tried, with the space available, to install an anti-rotation block, which was both easy to build and robust.
I hope you like it!
Alberto.
Reply With Quote
Bookmarks