User Tag List

Results 1 to 10 of 24

Thread: Mini Lathe Cross Slide Bearing Modification & Travel Extension

Oct 6, 2018, 10:13 AM #3

old_toolmaker

Supporting Member

Join Date

Dec 2017

Location

Cape Coral, FL

Posts

579

Thanks

647

Thanked 535 Times in 233 Posts

old_toolmaker's Tools

Awards Showcase

Total Awards: 5

jjr2001,

Thanks, JR! The thrust bearing came from McMaster-Carr.

Last edited by old_toolmaker; Oct 10, 2018 at 04:25 PM.

Dick

Links to some of my plans:

https://www.homemadetools.net/forum/...965#post105972 OFF-SET TAILSTOCK CENTER PLANS
http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION

Reply With Quote
The Following User Says Thank You to old_toolmaker For This Useful Post:

jjr2001 (Oct 6, 2018)

There are currently 1 users browsing this thread. (0 members and 1 guests)