Nice labels on a home budget

[Paul Alciatore]

I think your first photo is not the correct one.

As I understand your post, you are showing two ways of creating a labeled front panel. One using a black solder mask with a white silk screen. So, is the white silk screen applied first and the black solder mask on top of it? Or is the black solder mask applied first with the white silk screen on top of it? And how do you insure that the board maker applies these layers in the correct sequence.

And the second method is laser print on transparent(?) polyester laser printable labels. Or are they white? And does this method allow color images to be used? Apparently you do not use any protective coating on top of them.

Paul A.

Two ways to do labels on a home budget for short-run items. I don't have pictures handy of everything as I've moved most files off our server to an archive in preparation for our move.

Anyway,

#1 Front panel for small electronic products. I've used this on several items, the first was even put into production by my customer. When laying out the PC board for their product which fit in a standard Pactec box, we made a break-off section of the board which had holes for LEDs, connectors, controls and white silkscreen labeling. The board got a black solder mask. All they had to do was snap off this end of the board, slip it over the controls and screw it down in the box. Nice looking end panel.

You can't see the end panel in this one but you can see how it's used, the wires come through it and it's got the product name and company on it.



#2 I found polyester laser printable labels. Depending on your laser printer toner sticks better or worse to these, try to not curl or bend after printing. LEDs will shine right through this so you don't even need holes. The labels are water proof, I have some around 10 years old on our gates telling people to not let the chickens out...still in good shape. Here's some samples