A Pneumatic Horizontal Bandsaw Feedrate Limiter

[rgsparber]

Once in a while, I must cut very thin stock on my horizontal bandsaw. This requires a low feedrate. Sure I can do this by slowly lowering the arm but it can get tedious. A solution is to have a saw attachment that can be quickly dropped in place to do the task. Here is one such tool.

A centerpiece of this article is turning eccentric spigots on round stock.

If you are interested, please see

https://rick.sparber.org/PneumaticFeedrateControl.pdf


Your comments are welcome. All of us are smarter than any one of us.


Thanks,

Rick