Quote Originally Posted by Hans Pearson View Post
Drilling and tapping your mill table - ouch. I too have a similar problem and have not yet got as far as solving it, but my idea so far has been to manufacture an adapter plate which will line up with the T-slots on my lathe/angle plate. However, thanks for your submission.
Drilling and tapping of mill table (cast iron) was the simplest solution for me. I moved mill table all the way to the right and locked X axis movement. Two holes are in the same line that way and I don't see what's very wrong with these two holes. I don't see any job in near future which will require rotary table to be aligned in any other angle except 90 degrees.
Cheers
LMMM