Sealant corner nozzle - GIF

[Altair]

Sealant corner nozzle.




Previously:

Caulking floorboards - GIF
Quick change caulk gun - GIF
Caulk gun teardown - photo
Improvised caulking gun - photo
Low Profile Caulking Gun

[Inner]

https://www.amazon.com/Caulking-Stai...-tools&sr=1-27

$12.99

[Frank S]

Or use cake icing tips to add some texture

[tachetailleur]

I wonder how it works on internal corners?

[odd one]

They never work as good as on tv!

[Frank S]

They never work as good as on tv!

A little Dawn detergent on your bare fingertip will make any calk seam smooth and even. Afterwards, if need be, a little WD40 on a paper towel will clean up any excess.

[tachetailleur]

Even with the different attachments it looks like it would still be difficult to go behind taps / faucets. At 6 seconds there is an obstruction, and it looks like something was deliberately missing so the nozzle would pass over it. Looks like a nice finish on uninterrupted runs with smooth surfaces and no internal corners, though. Unfortunately, I tend to see the difficult stuff like taps in the way, short runs with odd access where you have to start and stop, and uneven tiles with those horrible dips at the gaps...