Simple height marker

[astroracer]

While building my Astro van i narrowed the existing rear wheel tubs. After I had cut them out I had to mark a line so I could trim them off at an even height. I simply hose clamped a Sharpie to my scribe and set it at the required height. With the tubs clamp square to the table it was quick job to get them both marked at the same width.


After marking.

After trimmoing.

Mark

[kbalch]

Thanks Mark! I've added your Height Marker to our Measuring and Marking category, as well as to your builder page: astroracer's Homemade Tools. Your receipt:

Height Marker by astroracer

tags: clamp, scribe

[DIYer]

Cool tip. Thanks!