small parts clamp plate

[naughtyboy]

needed to make up small spacers and was struggling to hold securely so made up clamp plate from some scrap 6mm plate.
started by cutting piece i needed out then marking out holes at 20mm centres.
next drilled a 19mm hole in centre followed by drilling and tapping other holes m6.

now i can clamp small bits to it then clamp plate to drill press table

[kbalch]

Thanks naughtyboy! I've added your Clamp Plate to our Drilling and Workholding categories, as well as to your builder page: naughtyboy's Homemade Tools. Your receipt:

Clamp Plate by naughtyboy

tags: clamp, tapping, drilling