-
Universal indicator
For many years I've had to use an assortment of indicating techniques for my lathe, depending on what I was trying to centre on the lathe. Based on a friend's efforts (but nothing like his) I finally came up with an indicator that can 1) indicate next to the chuck; 2) indicate along surfaces; 3) allow set over for eccentrics and 4) indicate bores.
This is the last video in the series of 4. Others are on the channel home page or in the unique tooling play list
https://www.youtube.com/watch?v=6TH4aS2SlUU
Michael
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Occasional machinist! We've added your Universal Indicator Holder to our Measuring and Marking category,
as well as to your builder page: Occasional machinist's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="https://www.homemadetools.net/homemade-universal-indicator-holder">
<img src="/uploads/275037/homemade-universal-indicator-holder.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="https://www.homemadetools.net/homemade-universal-indicator-holder">Universal Indicator Holder</a>
<span> by <a href="https://www.homemadetools.net/builder/Occasional+machinist">Occasional machinist</a></span>
</div>
<div class="tags">tags:
<a href='https://www.homemadetools.net/tag/dial-indicator'>dial indicator</a>, <a href='https://www.homemadetools.net/tag/holder'>holder</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
-
