Wire stripper and twister - GIF

[Frank S]

I'm looking at this and I see a huge problem.

I used to wire wrap square posts with 24 gage wire. It held it like glue. But as soon as I wrapped the same wire with the same wire wrap gun on a round shaft post. the wire slid right off.

So I see it as not good mechanical connection . I never done it but as you wind a spring on a medral , You know that the spring wire spring out on diameter of the mmendral. Just me thinking on this boring day.

What your are seeing as a huge problem is the fact that you are viewing the twisting stripper as the final step of the connection. which it would never be if the connection was done properly, the twisted part would either be folded back on itself and pinched with pliers or served with an additional device or material to hold it together.