LinkBack URL
About LinkBacks
![](https://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.homemadetools.net%2Fforum%2Fshowthread.php%3Fp%3D65093%23post65093&media=https%3A%2F%2Fs3.amazonaws.com%2Fhmt-newsletter%2Fhmt_avatar_200.jpg&description=Foredom-Panavise Carrier by Ed T - Marv,
You're a busy guy!! Now that you've gone and done the hard part on the Foredom holder, go one more step and weld a piece of 1/2" x 3/4" (or whatever) onto the tube and you can put in your QCTP on the lathe and have a mini tool post grinder. I have found this arrangement to be useful and especially so if I'm trying to "machine" rubber parts. Hard rubber (stoppers and the like) grind quite well and you can get a decent finish. "Pin It")
Marv,
You're a busy guy!! Now that you've gone and done the hard part on the Foredom holder, go one more step and weld a piece of 1/2" x 3/4" (or whatever) onto the tube and you can put in your QCTP on the lathe and have a mini tool post grinder. I have found this arrangement to be useful and especially so if I'm trying to "machine" rubber parts. Hard rubber (stoppers and the like) grind quite well and you can get a decent finish.
Reply With Quote
Bookmarks