Machinist Clamp Unconventional with prints

[jjr2001]

Unconventional Machinist Clamp.
These clamps take up about half as much space on the mill table as the standard machinist clamps.
With a small mill I find the conventional clamps too big to clear the mill column.
The answer comes from Harold Hall. He has a presence here on Homemade Tools and his own website as well.
Homemade Toolmaker's Clamps - HomemadeTools.net
Toolmakers Clamps 1

This is my version with plans for one with a 3.0" capacity. This can be increased by making the all thread studs longer. Jaw depth is just under 2 inches.
Loctite is used on the stud threads at the lower jaw and the rear most stud and it's brass knob. The picture shows the details as do the prints.

[DIYer]

Thanks jjr2001! We've added your Machinist's Clamp to our Clamps category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:

Machinist's Clamp by jjr2001

tags: clamp

[Jon]

Congratulations jjr2001 - your Unconventional Machinist's Clamps are the Homemade Tool of the Month for February 2025!

Not only are these useful clamps, but the comprehensive plans files will make them easier for everyone to reproduce.

Some more good builds from February:

T-Nut by Occasional machinist
Electric Lift and Trolley by Kwandotechnic
Glue and Finish Storage Box by Make Things
Parting Tool by celsoari
Wad Punch by xynudu
Wire Bender by VuVT Workshop
Anvil Micrometer by jjr2001
Mill Head Tilt Stops and Adjusters by mr_modify1
End Mill Sharpening Fixture by celsoari
Adjustable Table Saw Jig by Didpoolhall
Quick Change Tool Arbor by Mook
Sheetmetal Roller by VuVT Workshop
Bead Forming Tool by Christophe Mineau
Jigsaw Jig by Didpoolhall
Single Flute End Mill by celsoari
Infill Miter Plane by e_m_maker
Circle Cutting Guide by orioncons36
Knifemaker's Vise by Mazay
Dust Collector Blast Gates and Magnetic Connectors by The Hobby Machinist NZ
Dust Collector Enclosure by The Hobby Machinist NZ
Power Tool Magnet Mount by orioncons36
Router Channel Jig by Didpoolhall


jjr2001 - You'll be receiving a $250 cash prize, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and prize choice and I'll get it sent over right away.

This is your second Tool of the Month award. Here are both of your winning tools:

Sensitive Drilling Platform by jjr2001

tags: stand, drilling

Machinist's Clamp by jjr2001

tags: clamp

Nice work

[jjr2001]

Thank you. I will add this to my "tool fund".
Always a pleasure to read HMT.net and to post some of my own tools.
I spend at least 60% of my online machining research and just plain surfing on HMT.