I designed and built this Quick Change Lathe Turret about a dozen years ago. I used it on an 11" Logan model 1955 right up until I sold the lathe. It is able to index in 30 degree increments and holds 4 tools simultaneously. The available tool holders are: Turning, Facing, Boring, Parting, and V-Block. It took quite a bit of time to design and build but was fun and rewarding.
Dick
Links to some of my plans:
https://www.homemadetools.net/forum/...965#post105972 OFF-SET TAILSTOCK CENTER PLANS
http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION
aphilipmarcou (Sep 10, 2018), billd (Sep 10, 2018), drivermark (Sep 12, 2018), GauRex (Aug 6, 2019), Gregraper33712 (Sep 11, 2018), HobieDave (Mar 18, 2020), janders1957 (Sep 11, 2018), Jon (Sep 10, 2018), kairat (Nov 9, 2018), LMMasterMariner (Sep 11, 2018), olderdan (Sep 9, 2018), Papa Bill (Sep 12, 2018), Paul Jones (Sep 11, 2018), PJs (Sep 12, 2018), rossbotics (Sep 10, 2018), Seedtick (Sep 10, 2018), Stevohdee (Sep 10, 2018), threesixesinarow (Sep 10, 2018), Tonyg (Mar 18, 2019), Toolmaker51 (Sep 10, 2018)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks