Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 30

Thread: THREAD MILLING DEVICE!

  1. #11
    Supporting Member Floradawg's Avatar
    Join Date
    Jul 2018
    Location
    Flora, MS
    Posts
    622
    Thanks
    570
    Thanked 130 Times in 97 Posts

    Floradawg's Tools
    You ought to try talking with gun guys online. They are the worst. They love to rip newbies a new one for not knowing as much as they know, for being...well, newbies. I've also seen this in a shooting range I used to use. The guy in charge that day which I already knew, was full of himself. He thought he was the MAN. This young guy wanted to rent a Glock and shoot it with his girlfriend. The guy in charge asked him all sorts of stuff about which "model" of gun he wanted. He was purposely embarrassing this guy in front of his girlfriend. No I was not mistaking his intent. It was very obvious. Okay so all you gun guys, I am one of you and may be opening a can of worms here. I'm not trying to. Just telling what I have seen. It happens in lots of different forums, not just guns. I've witnessed a smidgen of it here. Not nearly as much as some other forums. For the most part you all are some of the nicest ones I've interacted with. Okay I'm bracing for a potential barrage.

    186 More Best Homemade Tools eBook
    Stupid is forever, ignorance can be fixed.

  2. #12
    Supporting Member machining 4 all's Avatar
    Join Date
    May 2020
    Posts
    379
    Thanks
    68
    Thanked 616 Times in 167 Posts

    machining 4 all's Tools
    Floradawg, I agree with your words! Completed this month a year participating in this forum, I'm still a novice here ... For an old man like me, participating helps me as a therapy, keeping my tired mind always busy. However, a minimum of respect must be maintained!

    2000 Tool Plans
    Last edited by machining 4 all; May 6, 2021 at 07:59 PM.

  3. The Following User Says Thank You to machining 4 all For This Useful Post:

    NortonDommi (May 10, 2021)

  4. #13
    WmRMeyers's Avatar
    Join Date
    Dec 2014
    Posts
    883
    Thanks
    402
    Thanked 366 Times in 252 Posts

    WmRMeyers's Tools
    Quote Originally Posted by machining 4 all View Post
    This is a photo of my first machining test with this device. The idea would be to make a second complete video, showing other details and applications. However, "experts" on this forum have already condemned this device in advance. Rest assured, I no longer intend to occupy you with my bad ideas...

    Attachment 39410
    There are a bunch of uses for a thread mill. Making high-precision lead screws is just one of them. Thread milling is used in industry so it cannot be that bad an idea. Getting industrial equipment to do it is a problem for hobbyists, so I for one would be much interested in how you do it. I would not worry about the nay-sayers. And I see that there are already several people who think this is a good thing besides me. Please, don't let the few who don't like it run you off!

    Bill

  5. #14
    WmRMeyers's Avatar
    Join Date
    Dec 2014
    Posts
    883
    Thanks
    402
    Thanked 366 Times in 252 Posts

    WmRMeyers's Tools
    Quote Originally Posted by Floradawg View Post
    You ought to try talking with gun guys online. They are the worst. They love to rip newbies a new one for not knowing as much as they know, for being...well, newbies. I've also seen this in a shooting range I used to use. The guy in charge that day which I already knew, was full of himself. He thought he was the MAN. This young guy wanted to rent a Glock and shoot it with his girlfriend. The guy in charge asked him all sorts of stuff about which "model" of gun he wanted. He was purposely embarrassing this guy in front of his girlfriend. No I was not mistaking his intent. It was very obvious. Okay so all you gun guys, I am one of you and may be opening a can of worms here. I'm not trying to. Just telling what I have seen. It happens in lots of different forums, not just guns. I've witnessed a smidgen of it here. Not nearly as much as some other forums. For the most part you all are some of the nicest ones I've interacted with. Okay I'm bracing for a potential barrage.
    I'm another gun guy. And despite having been a shooter since I was 4 years old, now approaching 66YO, though I wish I could deny what you say, I can't, because you're right, there are folks like that. Heck, I'm no expert. I was, for a few years, an expert photographer. Then digital photography came along and changed everything. Now I'm no longer an expert. I was an expert SATCOM operator/maintainer for the USAF for most of a dozen years, too. That's all changed, as well. And I had a long dry spell in there with guns, since all my long guns got stolen when I got shipped to Germany in the early 90's. Had two kids there, and another one shortly after returning to the States, and SWMBO disallowed guns as a hobby for the longest time. Something about feeding, housing, and clothing kids. So I'm not an expert on them anymore, either. I'm working on becoming an expert machinist. I figure it will take me about another, oh, 20 or 30 years. If I have them. I'm an owner of several metalworking and machining groups on Groups.io, most were formerly on Yahoo groups. I'm still learning, and will be at least until they nail the box shut on me. It is my personal belief that all the experts aren't as expert as they may think they are. What I did when I was learning to be an expert is try to help people who were not experts in what we were doing to become so, and to learn as much from them as I could, since their experiences were going to be different from mine. So I was pretty sure I could learn from them, too. Old military maxim is "If it's stupid, but it works, it isn't stupid." There is a reason for that.

  6. #15
    Supporting Member machining 4 all's Avatar
    Join Date
    May 2020
    Posts
    379
    Thanks
    68
    Thanked 616 Times in 167 Posts

    machining 4 all's Tools
    WmRMeyers, thank you for your comments! I only disagree when you believe that there are "few nay-sayers" on this forum. I follow the posts with some frequency (and I don't intend to do it anymore) and this is not my perception... I am not the one who loses with the arrogant stance of these nay-sayers. Those who could benefit in some way from my idea lose, either on this forum or elsewhere ...
    Last edited by machining 4 all; May 7, 2021 at 11:49 AM.

  7. #16
    WmRMeyers's Avatar
    Join Date
    Dec 2014
    Posts
    883
    Thanks
    402
    Thanked 366 Times in 252 Posts

    WmRMeyers's Tools
    Quote Originally Posted by machining 4 all View Post
    WmRMeyers, thank you for your comments! I only disagree when you believe that there are "few deniers" on this forum. I follow the posts with some frequency (and I don't intend to do it anymore) and this is not my perception. I can withstand frequent toothache, kidney stones, deviation of the cervical spine and even a heart attack, but I can't stand a lack of respect. For a dead thread we are just going to provide a decent burial by not talking about it anymore!
    Makes more sense to me to ignore the dunderheads, but it's your choice. Just sorry you feel that way, as I'd have liked to see more about it.

    Bill

  8. The Following User Says Thank You to WmRMeyers For This Useful Post:

    tonyfoale (May 12, 2021)

  9. #17
    Supporting Member machining 4 all's Avatar
    Join Date
    May 2020
    Posts
    379
    Thanks
    68
    Thanked 616 Times in 167 Posts

    machining 4 all's Tools
    VmRMeyers, thanks for respecting my decision. Continue on to another topic, maybe an “expert” will show us how to do it!
    Last edited by machining 4 all; May 6, 2021 at 04:16 PM.

  10. #18
    Supporting Member Floradawg's Avatar
    Join Date
    Jul 2018
    Location
    Flora, MS
    Posts
    622
    Thanks
    570
    Thanked 130 Times in 97 Posts

    Floradawg's Tools
    WmRMeyers you and I have some things in common. I will be 67 this month and I was also in the USAF. (go Falcons) I was a RICMT (radar inputs and countermeasures technician) at Fort Lee AF Station in Virginia. We were the headquarters for the 20th NORAD Region. My final year I served at Murphy Dome AFS as a WCT (Weapons Control Tech) in Alaska. My job, in addition to other duties, was to scramble interceptors to "escort" the Soviets out of our area. I was in for 4 years from 1974 to 1978. I'm not an expert on anything, Jack of all interests, master of none. I do some metalworking, some woodworking, target shooting and a little astronomy. And whatever else I find interesting.
    Stupid is forever, ignorance can be fixed.

  11. #19
    Supporting Member DIYSwede's Avatar
    Join Date
    May 2019
    Location
    Stockholm, Sweden...
    Posts
    634
    Thanks
    415
    Thanked 799 Times in 319 Posts

    DIYSwede's Tools
    Picking up on the different forum threads after being away for a week:
    M4A: -Jeez, man - this thread really went off the rails.
    I'm truly sorry for hurting your feelings.

    I just want to say that I DO appreciate your ideas and capabilities shown in several posts,
    hence I merely suggested a more "how-to" approach in filming: as this is a forum for DIYers who (as I),
    try to learn more by sharing, asking, suggesting and also (hopefully) constructively criticizing builds.

    For my own few projects, there's has been a constant rollercoaster of progresses and setbacks, often helped by fellow HMT:ers,
    by them pitching in with thoughts, suggestions and experiences bigger than mine.
    For instance, achieving a good finish in my projects is a "field of improvement" I've yet to embrace,
    exactly by relying on these expert HMT:ers (including you) who makes all these nicely finished builds.

    I'd like to believe my own ignorance can only be fixed by actually humbly listening to critical, competent and loyal friends,
    carefully considering and testing their shared input against my own believed "truths". Pretty rough cure at times, I admit.
    Heck - they all waste some pretty good time in reading/ watching, thinking over and writing answers to me -
    who am I to judge, brand or diminish them?
    I try to focus on "principles rather than personalities", and may the best practice or argument "win",
    anyone else's or mine - that doesn't matter at all to me.

    I sincerely hope you can get over those feelings of persecution and victimhood you're seemingly in,
    and instead will enjoy and harvest HMT at its fullest and diverse generosity.

    2 cent

    Johan

  12. The Following 2 Users Say Thank You to DIYSwede For This Useful Post:

    NortonDommi (May 10, 2021), Sleykin (May 9, 2021)

  13. #20
    Supporting Member old_toolmaker's Avatar
    Join Date
    Dec 2017
    Location
    Cape Coral, FL
    Posts
    579
    Thanks
    647
    Thanked 442 Times in 180 Posts

    old_toolmaker's Tools
    Johan,
    That was very well said. I don’t think I could express my thoughts any better.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •