Crusty,
This is one way to grind a surface and it looks like it worked.
Be very careful using compressed air when cleaning machines. The air can and will drive grit into everything and that can and will cause increased wear on sliding parts.
Crusty,
This is one way to grind a surface and it looks like it worked.
Be very careful using compressed air when cleaning machines. The air can and will drive grit into everything and that can and will cause increased wear on sliding parts.
Dick
Links to some of my plans:
https://www.homemadetools.net/forum/...965#post105972 OFF-SET TAILSTOCK CENTER PLANS
http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks