Tail Stock Taper Turning Attachment

[rossbotics]

I just finished mine. A really good project. Turned out nice. I don't have any straight knurls so used a fine diamond but sort of botched it. Not sure if it was the gummy aluminum or operator error. Also my knurler is for 2" max diameter so had to set it up off center quite a bit, I'm sure that didn't help. Also I had no way to mark out the thou and half thou lines so this is how it will be.

You did a beautiful job ddickey !
I made a graduated scale drawing that was to be printed on decal paper for people that had no way of indexing those graduations, as long as you held the diameter of the hand wheel as stated on the drawing otherwise you can measure the diameter of your hand wheel and do a cad drawing yourself that will match the circumference of your wheel, that's how I made the original.

Other than that you did a beautiful job and great work !

Jon the Admin. will let you have a set of my plans of your choice free for posting your completed tool !
Great Job ddickey !
And thank you for posting your completed project
Doug