User Tag List

Results 21 to 21 of 21

Thread: Hold down clamp from a rocker arm

Feb 2, 2022, 09:53 PM #1

Frank S

Supporting Member

Join Date

Aug 2015

Location

Peacock TX

Posts

11,258

Thanks

2,003

Thanked 8,817 Times in 4,223 Posts

Frank S's Tools

Awards Showcase

Total Awards: 13

Hold down clamp from a rocker arm

I have mentioned these several times in the past but never published one, so today when I found one while rummaging around looking for something else I decided it was time to make one again.
I started with a rocker arm from a SB gm engine, with a bur file on a die grinder I enlarged the hole to accept a 1/2" T bolt then drilled out the threads from a lug-nut to become the swivel washer

Never try to tell me it can't be done
When I have to paint I use KBS products

Reply With Quote
The Following 15 Users Say Thank You to Frank S For This Useful Post:

baja (Feb 4, 2022), Cascao (Feb 3, 2022), DIYSwede (Feb 3, 2022), EnginePaul (Feb 7, 2022), Hoosiersmoker (Sep 22, 2023), Jon (Feb 4, 2022), neilg4dbn (Feb 6, 2022), NortonDommi (Feb 4, 2022), nova_robotics (Feb 6, 2022), Philip Davies (Feb 7, 2022), rebuilder1954 (Feb 5, 2022), rlm98253 (Feb 3, 2022), Saltfever (Feb 7, 2022), sossol (Feb 4, 2022), Toolmaker51 (Feb 4, 2022)